Need to desolder components? Short circuit? With this desoldering braid it's easy to remove any excess solder.
The braid is applied to the area that needs soldering and heated with a soldering iron. The desoldering braid then absorbs the liquid tin.
Desoldering braid 1.5mm/1.6m
Stannol
• Electrolyte copper E-Cu F20 for electronic conductance purposes
• Round braid in accordance with DIN4643
• Desoldered wick made of bare copper, soaked with flux
• Durable, copper coloured, odour-free
• Desolders components and easily removes surplus molten solder
• Excellent capillary action
The braid is applied to the area that needs soldering and heated with a soldering iron. The desoldering braid then absorbs the liquid tin.
Desoldering braid 1.5mm/1.6m
Stannol
• Electrolyte copper E-Cu F20 for electronic conductance purposes
• Round braid in accordance with DIN4643
• Desoldered wick made of bare copper, soaked with flux
• Durable, copper coloured, odour-free
• Desolders components and easily removes surplus molten solder
• Excellent capillary action
Length: | 1.6m |
Softening Temperature, min.: | 75°C |
Flaming Point, approx.: | 180°C (COC) |
Ignition Temperature: | 273°C (COC) |
Order